Team:IPN-UNAM-Mexico/Protocols

From 2009.igem.org

(Difference between revisions)
Line 1: Line 1:
{{Template:IPN-UNAM-Mexico}}
{{Template:IPN-UNAM-Mexico}}
 +
__FORCETOC__
 +
== Competent cells with RbCl ==
 +
#Take 5 ml of liquid SOB and incubate at 37 °C overnight
 +
#Take 1 ml of cell culture and innoculate into 500 ml of YENB media and incubate at 37 °C and 200 rpm until O.D.=0.5-0.55
 +
#Transfer the cells to 250 ml bottles (must be cold)
 +
#Incubate for 30 minutes on ice
 +
#Centrifuge at 2500 rpm for 15 min at 4°C.
 +
#Resuspend cells in 20 ml of ice-cold RF1 solution
 +
#Incubate for 15 min on ice
 +
#Centrifuge at 2500 rpm for 15 min at 4°C.
 +
#Resuspend cells in 2 ml of ice-cold RF2 solution.
 +
#Incubate for 15 min on ice and divide into 200 μl aliquots and store at -70°C
 +
 +
=== RF1 solution ===
 +
 +
*Rubidium chloride....................... 100 mM
 +
*Manganese chloride tetrahydrate......... 50 mM
 +
*Potassium Acetate....................... 30 mM
 +
*Calcium chloride dihydrate.............. 10 mM
 +
*Gycerol................................. 15 %
 +
 +
#Adjust pH to 5.8 with 0.2 M of glacial acetic acid and sterilize by filtration using a 0.22 μm filter
 +
 +
 +
===RF2 solution===
 +
 +
*Rubidium chloride....................... 100 mM
 +
*MOPS.................................... 10 mM
 +
*Calcium cloride dihydrate............... 75 mM
 +
*Gycerol................................. 15 %
 +
 +
#Adjust pH to 6.8 with 0.2 M of NaOH and sterilize by filtration using a 0.22 μm filter
 +
 +
==CTAB miniprep==
 +
#Take 1.5 ml of cell culture and centrifuge at 15000 rpm for 3 minutes.
 +
#Discard liquid phase
 +
#Repeat 2 and 3
 +
#Resuspend cells with 1 ml of NaCl 1.2 M with vortex
 +
#Centrifuge at 13500 rpm for 3 minutes and discard supernatant.
 +
#Add 100 μl of sterile water and resuspend with vortex
 +
#Add 200 μl of STET and mix with vortex.
 +
#Add 4 μl of lysozyme and mix with vortex.
 +
#Incubate for reaction to occur for 5 min at 37°C then boil for 45 seconds.
 +
#Centrifuge at 15000 rpm for 10 min.
 +
#Discard pellet.
 +
#Add 8 μl of CTAB and centrifuge at 15000 rpm for 5 min.
 +
#Discard supernatant
 +
#Resuspend with 300 μl of NaCl 1.2 M using vortex.
 +
#Add 1 ml of ethanol and incubate at -20°C for 20 min.
 +
#Centrifuge at 15000 rpm for 10 min.
 +
#Discard supernatant.
 +
#Wash with 1 ml of 70% ethanol and centrifuge for 3 min.
 +
#Discard ethanol by decantation.
 +
#To dry remaining ethanol use a thermoblock at 65°C.
 +
#Resuspend with 100 μl of sterile water and add 1 μl of RNase.
 +
#Incubate at 37°C for 30 min.
{{Template:IPN-UNAM-Mexico-footer}}
{{Template:IPN-UNAM-Mexico-footer}}

Revision as of 22:47, 20 October 2009


BannerUNAM.jpg


Contents

Competent cells with RbCl

  1. Take 5 ml of liquid SOB and incubate at 37 °C overnight
  2. Take 1 ml of cell culture and innoculate into 500 ml of YENB media and incubate at 37 °C and 200 rpm until O.D.=0.5-0.55
  3. Transfer the cells to 250 ml bottles (must be cold)
  4. Incubate for 30 minutes on ice
  5. Centrifuge at 2500 rpm for 15 min at 4°C.
  6. Resuspend cells in 20 ml of ice-cold RF1 solution
  7. Incubate for 15 min on ice
  8. Centrifuge at 2500 rpm for 15 min at 4°C.
  9. Resuspend cells in 2 ml of ice-cold RF2 solution.
  10. Incubate for 15 min on ice and divide into 200 μl aliquots and store at -70°C

RF1 solution

  • Rubidium chloride....................... 100 mM
  • Manganese chloride tetrahydrate......... 50 mM
  • Potassium Acetate....................... 30 mM
  • Calcium chloride dihydrate.............. 10 mM
  • Gycerol................................. 15 %
  1. Adjust pH to 5.8 with 0.2 M of glacial acetic acid and sterilize by filtration using a 0.22 μm filter


RF2 solution

  • Rubidium chloride....................... 100 mM
  • MOPS.................................... 10 mM
  • Calcium cloride dihydrate............... 75 mM
  • Gycerol................................. 15 %
  1. Adjust pH to 6.8 with 0.2 M of NaOH and sterilize by filtration using a 0.22 μm filter

CTAB miniprep

  1. Take 1.5 ml of cell culture and centrifuge at 15000 rpm for 3 minutes.
  2. Discard liquid phase
  3. Repeat 2 and 3
  4. Resuspend cells with 1 ml of NaCl 1.2 M with vortex
  5. Centrifuge at 13500 rpm for 3 minutes and discard supernatant.
  6. Add 100 μl of sterile water and resuspend with vortex
  7. Add 200 μl of STET and mix with vortex.
  8. Add 4 μl of lysozyme and mix with vortex.
  9. Incubate for reaction to occur for 5 min at 37°C then boil for 45 seconds.
  10. Centrifuge at 15000 rpm for 10 min.
  11. Discard pellet.
  12. Add 8 μl of CTAB and centrifuge at 15000 rpm for 5 min.
  13. Discard supernatant
  14. Resuspend with 300 μl of NaCl 1.2 M using vortex.
  15. Add 1 ml of ethanol and incubate at -20°C for 20 min.
  16. Centrifuge at 15000 rpm for 10 min.
  17. Discard supernatant.
  18. Wash with 1 ml of 70% ethanol and centrifuge for 3 min.
  19. Discard ethanol by decantation.
  20. To dry remaining ethanol use a thermoblock at 65°C.
  21. Resuspend with 100 μl of sterile water and add 1 μl of RNase.
  22. Incubate at 37°C for 30 min.

Banner footer UNAM2.jpg