Team:Washington-Software/Project

From 2009.igem.org

Revision as of 06:06, 20 October 2009 by GSee (Talk | contribs)
WashingtonColorSeal-21-clip.gif Home Team Project Modeling Notebook Challenges Miscellaneous


Contents

Overall project

Proof of Principle Demo


BioBrick-A-Bot Model C is the prototype of an extensible Genomic Lab Liquid Handling System. We build it using Lego bricks, and it can be easily replicated by other iGEM teams and by researchers in Molecular Biology who cannot afford a typical, $10,000, commercial system. The design is modular plug-and-play, so that we can easily collaborate with future iGEM teams to modify or improved on its design and add new functionalities. This project looks deceptively simple superficially, because it uses Lego bricks, and because I am only 11 years old. However, looks is extremely deceiving as explained in the challenges section. The external industry experts and advisors on this team can also testify to that.


BioBrick-A-Bot comprised of 2 LegoRoboBrick modules (ALPHA and PHI), mounted on a frame (BETA). Here’s what the acronyms means:

  • ALPHA – Automated Lego Pipette Head Assembly
  • PHI – Pneumatic Handling Interface
  • BETA – BioBrick Environment Testing Apparatus


This project needs great precision to position the pipette head accurately in 3-D space, and to transfer a few microliter of fluids. In order to achieve the much needed precision, we have replaced the Lego NXT firmware with [http://www.robotc.net/ RobotC firmware] which provide floating point representations. RobotC also gives us the flexibility to develop sophisticated C programs needed to drive this project. The computations to reverse-triangulate any point in 3-D space is also non-trivial. We use 3x3 rotational matrix to simplify our mathematical modeling .


Due to a hardware limitation of Lego Minsdstorm, each NXT brick can only be connected to a maximum of 3 motors. We need 6 motors for this project, and use 2 NXT bricks. We designed and implemented a Master Slave Synchronization System using blue-tooth wireless technology. ALPHA is the master and when it is properly positioned at the right location, it will transmit wireless messages to PHI to request the type of pipette operations that it needs (either aspirate, dispense or clean)


We provide a proof of concept of this project by demonstrating the transfer of blue dyes, 4 at a time, from 1 side of the 96-well plate to the other.

Project Summary

Hardware

  • Lego Bricks (Lego Mindstorms NXT 2.0)
    • Commonly accessible industry standard

Firmware

  • RobotC (version 1.40)
    • Made in CMU Robotics Academy
    • Enables floating point precision

Software

  • ALPHA module (version 1.0)
    • Precise reverse triangulation using Rotational Matrix
    • Controller of Master-Slave Synchronization
    • Accurately positions pipette head
  • PHI module (version 1.0)
    • Pneumatic control to aspirate and dispense fluid
    • Compression pump to "air-clean" system

LegoRoboBrick Modules

This is BioBrick-A-Bot from a side and a front view.

Robot Side View.jpg
Robot Front View.jpg




















Module ALPHA

ALPHA was created in August 21, 2009. It consists of three double-jointed arms as shown in the picture. One joint is referred as the control arm and is connected to the motor which controls entirely the joint. The other joint, referred as a linkage is loosely attached and moves in a sphere. The end of this attaches to the platform which holds the four pipette tips.

ALPHA


Two different ALPHA modules in action

  • This video shows that the same code can be used for different physical instances of ALPHA. All instances of ALPHA are the same, except for 6 physical constants:
    1. Top Offset
    2. Bottom Offset
    3. Control Arm Length
    4. Linkage Arm Length
    5. Inter-arm Angle
    6. Gear Ratio

Module BETA

BETA

BETA provides the environment where the robot can move and conduct its task. It consists of a telescoping frame and a big lego plate under the stand. The telescoping fram is used for holding ALPHAs and PHIs, and the lego plate is where the 96-well plates and petri dishes are placed.

Module PHI

PHI

PHI is basically the pipette. It consists of three motors as following:

  • Motor A.
    • This motor controls the flow of the air. If you look at it from the side when the switch is visible:
      • When the switch is to the left, there is a direct flow from the pipet head to the air. This makes it possible to use the second motor (motor B) to attempt to aspirate without aspirating any liquid, and enabling it to blow extra air out.
      • When the switch is in the middle, there is no connection.
      • When the switch is to the right, the pressure built up in the air tank is released into the pipette head.
  • Motor B.
    • This motor is connected to a piston, so it can aspirate and dispense liquid.
  • Motor C.
    • This motor is connected to to compressors compressing air in the air tank. It runs for 7 seconds once the air is released.

PHI module in action

  • This video shows Phi running by itself.
Retrieved from "http://2009.igem.org/Team:Washington-Software/Project"