Revision as of 10:18, 16 October 2009 by YinanZhang (Talk | contribs)



Theriotical analysis of the process gives us a quantitative insight into the process. We consider a motor having its simplest shape, i.e. a single lamina with a vertical axis in the middle.


This situation can be analytically solved on the basis of the following assumptions:

  1. power of a bacteria is kept a constant;
  2. friction coefficient of a small object undergoing slow motion is proportional to the cross sectional area;

Let us take a look at the validity of the above assumptions.

A bacterium can be thought of as a truck travelling along an expressway. If it is free of loading, the truck feels very limited frictional force from the environment, and will be moving at a very high speed. On the other hand, if the truck is heavily loaded with tons of coals, the frictional force will increase linearly. As a result, the truck will have a much lower maximum speed. However, in both situations, the power of the truck remains the same because of the property of the engine. So is the same for bacteria. The power supplied by the motor of the flagella is kept a constant, regardless of the “working condition”, namely whether pushing a motor or not. Thus, the 1st assumption is thought to be reasonable.

The 2nd one is taken from the fluid-dynamics, saying that friction is proportional to the cross sectional area for small objects with slow motion. The motor and the bacteria have a size of HKU-HKBU modeling f1.png and HKU-HKBU modeling f2.png respectively, both falling into the region of “small objects”. The low speed of a bacteria, HKU-HKBU modeling f3.png, also fits into the “slow motion” condition. Therefore, the 2nd assumption is believed to be suitable in our case.

Calculation of Rotational Velocity

We start out by calculating the power of a single bacterium first. Under freely swimming condition, a bacterium can move at a maximum speed of HKU-HKBU modeling f4.png (HKU-HKBU modeling f5.png). If the friction coefficient is HKU-HKBU modeling f6.png, then the friction is given by

HKU-HKBU modeling f7.png.

Here, HKU-HKBU modeling f8.png is a function of expression level of CheZ: if CheZ is fully expressed, the bacteria speed should be maximized, correspondinglyHKU-HKBU modeling f9.png. On the other hand, if CheZ is completely knocked out, bacteria should lose the swimming ability. Thus, HKU-HKBU modeling f10.png corresponds to this case.

Hence, the power is

HKU-HKBU modeling f11.png.

Next, we estimate the power consumed by the motor, rotating at an angular velocity HKU-HKBU modeling f12.png, due to friction. Consider a small element on the motor from r to r+dr, namely the red part in Fig 2. Let HKU-HKBU modeling f13.png be the friction coefficient of the motor. Hence, from the 2nd assumption, the friction coefficient for the small element is HKU-HKBU modeling f14.png, l here is the width of the motor. Thus, the friction force on this element, proportional to its velocity HKU-HKBU modeling f15.png, is

HKU-HKBU modeling f16.png

Power consumed by this element is

HKU-HKBU modeling f17.png

The total power consumed on the motor is then the sum, or integration in other words, of all the HKU-HKBU modeling f18.png,

HKU-HKBU modeling f19.png

The power supplied by the bacteria is completely consumed by the motor frictional force. With the conservation of energy, we have

HKU-HKBU modeling f20.png

Here, h is the height of the motor along the axis direction and n is the number of bacteria per unit area on the motor.

Resutls and Discussion

According to assumption 2, we can further reduce the above equation. Let HKU-HKBU modeling f21.png, HKU-HKBU modeling f22.png,

C and HKU-HKBU modeling f23.png are the friction coefficient per unit area of bacteria and motor respectively. a is the cross section area of a bacteria. Substitute them into the above equation gives

HKU-HKBU modeling f24.png

HKU-HKBU modeling f25.png here, is just a constant of order HKU-HKBU modeling f26.png.

The model predicts the followings:

  1. Angular velocity is independent of height h of the motor;
  2. Angular velocity is linearly proportional to the width l of motor and the velocity of bacteria. As a consequence, the expression level of CheZ monotonically affects the rotational velocity. In other words, higher expression level of CheZ results in faster rotation.

This model is only applicable for small objects. So, despite independence of h, the height of the motor still can’t be too large. In other words, it should be confined within HKU-HKBU modeling f27.png. What’s more, even the rotational velocity is inversely proportional to l, the length of the motor can’t be too small because narrow motor would result in too few bacteria attached, which leads to too much noise and fails to fit into this model. To be more precious, a suggested length of motor should be of the order of HKU-HKBU modeling f28.png. Thus, with a motor having a width of HKU-HKBU modeling f29.png, the angular velocity will be about HKU-HKBU modeling f30.png.