Team:HKU-HKBU/Motor Preliminary Trials

From 2009.igem.org

Revision as of 20:07, 17 October 2009 by CarlosX (Talk | contribs)

Contents

Membrane Production

Step 1

The Immobolin-P membrane was first made wet and consequently homogenized with a mini-homogenizer.

Results: The membrane could not be broken into small pieces.

HKU-HKBU motor results 1.png

Step 2

The Immobolin-P membrane was first moistened, then it was put into a 10ml centrifugation tube. The tube was then totally filled with glass beads, and undergo vortexing subsequently.

Results: The membrane remained intact.

HKU-HKBU motor results 2.png
HKU-HKBU motor results 3.png

Step 3

The Immobolin-P membrane was moistened and liquefied nitrogen was poured onto it. The membrane was broken into pieces by human hands.

Results: The membrane remained intact.

Step 4

The Immobolin-P membrane was first biotinylated and cut into very small pieces by human hands. Then, the membrane fragments were put into a mould made with aluminium foil and fixed into it with the help of glue. The mould along with the membrane fragment were cut with a Leica-crytomicrotome into further smaller pieces the size of 100umx60umx100um.

HKU-HKBU motor results 4.png
HKU-HKBU motor results 5.png
HKU-HKBU motor results 6.png

Step 5

Some elemental silicon fragments were put inside a 1-ml eppendorf tube. The protein-biotin complex and some concentrated HCL were then added into the same tube. The tube was put inside a water bath for 2 hours. The silicon fragments were made dry by rinsing with PBS and followed by air drying. Then, some streptavidin containing beads were added onto the fragments. The fragments were observed under a microscope.

Results: No beads were bound to the silicon fragments.

Step 6

The silicon fragments were silanized by soaking them for 2 h in a solution of aminopropyl triethoxyl silane (3% aminopropyl triethoxyl silane, 2% acetic acid, 5% water, 90% ethanol), then rinsed with ethanol, and dried with a PCR machine for 5 mins. The amino-coated rotors (Fig. 2Bh) were then reacted with 1 mM succinimidyl-6-(biotinamido)-6-hexana- mido hexanoate (EZ-Link NHS-LC-LC-biotin; Pierce, Rock- ford, IL) dissolved in 40 mM phosphate buffer (pH 8.0) for 1 h at 37°C. Then strepatavidin beads were allowed to bind onto it and the fragments were observed under a microscope.

Sponsors