Team:Kyoto/CiC/Experiment

From 2009.igem.org

Revision as of 02:39, 22 October 2009 by TADA (Talk | contribs)

  1. Home
  2. Cells in Cells
  3. Results & Discussion

Experiments

Construction

HIV-TAT::(LALAAAA)3 expressing vector (BBa_K210009)

PartsOriginLength /bp
T7 promoterBBa_I71207446
RBS+HIV-TAT+HIStag+(LALAAAA)3 201
TerminatorBBa_B0015129

†RBS+HIV-TAT+HIStag+(LALAAAA)3 was made by elongation of primer dimer.

Forward primer;

cggaattcgcggccgcttctagagaaagaggagaaatactagATGTATGGACGTAAAAAACGTCGTGGACGTCGTCGTGGCGGCGGTCAT CATCATCATCACCATGGCGG

Reverse primer;

ctgcagcggccgctactagtaTTACGCGGCCGCCGCCAGGGCCAGCGCGGCCGCCGCCAGGGCCAGCGCGGCCGCCGCCAGG GCCAGGCCACCGCCATGGTGATGATGATG

Signal for TIM23 complex::GFP expressing vector (BBa_K210010)

PartsOriginLength /bp
T7 promoterBBa_I71207446
RBS+Signal for TIM23 complex::GFP+terminatorBBa_E0240929

†RBS+Signal for TIM23 complex::GFP+terminator was made by two-stage PCR.

First-stage PCR

Forward primer;

TTTAAACCGGCGACCCGTACCCTGTGCTCTTCTCGTTATCTGCTGcgtaaaggagaagaacttttcactggagttg

Reverse primer;

agtgagctgataccgctcgc

Second-stage PCR

Forward primer;

cggaattcgcggccgcttctagagaaagaggagaaatactagATGCTGAGCCTGCGTCAGTCTATTCGTTTTTTT AAACCGGCGACCCGTAC

Reverse primer;

agtgagctgataccgctcgc

Signal for TIM23 complex::EGFP expressing vector for HeLa cells

We made the phosphated primerdimer by below primers. And, ligate it and pEGFP-N3 (GenBank Accession #: U57609) digested by Xho1 and Pst1.

Forward primer;

TCGAGgccaccATGggtCTGAGCCTGCGTCAGTCTATTCGTTTTTTTAAACCGGCGACCCGTACCCTGTGCTCTTCTCGTTATCTGCTG

Reverse primer;

AATTCAGCAGATAACGAGAAGAGCACAGGGTACGGGTCGCCGGTTTAAAAAAACGAATAGACTGACGCAGGCTCAGaccCATg gtggcC

Making proteoliposome by RTS

1. Remove the solvent of 50mM DOPC (Di-oleyl phosphatidylcholine, resolute in chloroform: methanol=2:1) 100μl in Ar.

2. Desiccate the DOPC in vacuum

3. Add 50mM HEPES-KOH 100μl

4. Adjust liposome size by mini-extruder of 200nm pore size filter

5. Making proteoliposomes in RTS

sample namevolume /ul
E.coli lysate12
reaction mix 10
Amino acids mix12
methionine1
DNA1
liposome14


6. Ultracentrifuge RTS product in 5, 10, 15, 20, 25% sucrose HEPES-KOH solution.

The isolation of mitochindria from yeast

1.Prepare 1L of yeast culture.       

2.Cfg.) at 2000×g for 5 min.

3.Weigh the gained yeast pellets. (Normally, 3-5g in total)

4.Resuspend all the pellets together in 50ml of Tris-Buffer and shake at 30℃ for 30 min.

5.Cfg.) at 2000×g for 5 min.

6.Resuspend the pellet in 45ml of Sorbitol Buffer.

7.Cfg.) at 2000×g for 5 min.

8.Resuspend the pellet in 40ml of Sorbitol Buffer. Add 5mg of zymolyase 20-T per 1g of yeast pellet.

9.Incubate at 30℃ for 15-30 min. (Until the spheroplasts are formed sufficiently. )

10.Cfg.) at 6000×g for 5 min. (at 4℃)

11.Resuspend the pellet in 30ml of ice cold Sorbitol Buffer.  (The following steps should all be carried out on ice, or at 4℃ when centrifuging.)

12.Cfg.) at 3000×g for 5 min. (at 4℃)

13.Resuspend the pellet in 30ml of Breaking Buffer.

14.Homogenize the suspension in Dounce homogenizer. With 15 strokes by pestle A (tight fitting).

15.Cfg.) at 1000×g for 5 min. (at 4℃)

16.Transfer the supernatant (~30ml) to a clean FALCON tube and store it as Sup-1 on ice. Resuspend the pellet in 30ml of Breaking Buffer and homogenize it. (Dounce, pestle A, 15 strokes)

17.Cfg.) at 1500×g for 5 min.

18.Transfer the supernatant to the Sup-1 tube and mix it together.

19.Cfg.) at 12000×g for 5 min.

20.Discard the supernatant and add 30ml of Breaking Buffer to the pellet, and resuspend it thoroughly by pipetting.

21.Cfg.) at 1500×g for 5 min.

22.Transfer the supernatant to a clean FALCON tube.

23.Cfg.) at 12000×g for 10 min.

24.Resuspend the pellet in 30ml of SEM Buffer.

25.Cfg.) at 12000×g for 10 min.

26.Resuspend the pellet in 1ml of SEM Buffer. (The isolated mitochondrial fraction is gained.)

Observation

Subgoal A

In the experiment on subgoal A, we are aimed to confirm that the liposome with HIV-TAT can intrude mammalian cells.We will mix pSB1A2-T7 promoter- HIV-TAT::(LALAAAA)3-ter and liposome with fluorochrome and translated by RTS. When HIV-TAT::(LALAAAA)3 is translated, it sticks the lipid bilayer. As a result, the liposome which has HIV-TAT on their surface is completed. Adding it to HeLa cells. Later, we will observe the fluorescence of liposome in HeLa cells.

We chose HeLa cells for this experiment. HeLa cells were cultured at 37°C in D-MEM/F-12. The media was supplemented with 10% FBS and an antibitic/antimycotic solution for maintaining HeLa cells. To confirm the function of translocation into cells of TAT-anchored liposomes, HeLa cells were cultured with prepared TAT-liposome with NBD-PE, which is a fluorescent molecule bind to lipid. HeLa cells were plated in 3.5 cm glass bottom dish (6x105 cells/well), pre-incubated for 20 hours at 37°C, and the medium was replaced with Opti-MEM that containing the NBD-PE-liposome with or without TAT. The cells were incubated at 37°C for 4 hours and washed by fresh D-MEM/F-12 supplemented with 10% FBS twice, and then, obserbed. The fluorescent images were captured by IX81 microscope system using a 470- to 495-nm excitation filter and a 510- to 550-nm emission filter. The conforcal images were captured by Nikon A1Rsi conforcal microscopy system with 0.6 um step using a 488 nm semiconductor lazer for excitation and 525/50 nm emission filter. The result is here.


Subgoal B

In the experiment on subgoal B, we are aimed to confirm that the recombinant of TIM23 complex can work as a protein translocater for its signal peptide. First, we confirm that the protein with the signal peptide for yeast can be taken in yeast’s and HeLa cell’s mitochondria.

In the case of yeast’s mitochondria, we isolate mitochondria from yeast, translate signal GFP (BBa_K210010) by RTS and PURE system in which we have added the isolated yeast’s mitochondria. Then we will observe the localization of GFP fluorescence. The prepared yeast mitocondria suspension was mixed to the cell-free protein synthesis with sigGFP plasmid. We tried the synthesis kit RTS (Roshe, for total amount of synthesized protein), or Puresystem (postgenome, for the obtained proteins pulity). The mitocondria suspension was added to the protein synthesis solution. Except for the mitcondria suspension, the protein synthesis reactions were done followed the company’s protocols. After the reaction finished, Mitotracker orange(invitrogen) in DMSO was added to the liposome/mitocondria sample. The final concentration was 400nM. After gently shaking for 20min at 37ºC, the sample solution was spin-washed with 1mL of SEM buffer (12,500xg, 4ºC, 10min., twice). Washed sample was re-suspended for 20µL by SEM buffer. Obtained mitocondria suspensions were observed by fluorescent microscopy and laser scanning microscopy.


In the case of HeLa cell’s mitochondria, we transform HeLa cell by Signal for TIM23 complex::EGFP expressing vector for HeLa cells. Later, we will observe the localization of EGFP fluorescence. This research is aimed to confirm the function of signal sequence using the plasmid coding sig-GFP. Although the signal sequence is derived from yeast, we determined to use HeLa cell for the confirmation since the sequence was expected to work in other eukaryotic cells and yeast cell might be too small to observe its mitochondria. HeLa cells were cultured at 37°C in D-MEM/F-12 for this experiment. The media was supplemented with 10% FBS and an antibitic/antimycotic solution for maintaining HeLa cells. The incubator contained air that was enriched with 5% CO2. HeLa cells were plated in a 6 well glass bottom plate (6x105 cells/well), pre-incubated for 9 hours at 37°C, and the medium was replaced with fresh D-MEM/F12 supplemented with 10% FBS. The cells were transfected with 1.5 ug of pGFP or psigGFP using 3.75 ul of lipofectamine 2000 according to the standard protocols provided by invtrogen. After 12 hours or more of the transfection, the medium was replaced with fresh medium with or without 100 nM of mitotracker orange in order to visualize the location of mitochondria, and incubated at 37°C for 15 min. The stained cells were washed by fresh medium twice, and then microscopic images were captured. The microscopic images were captured by a IX81 microscope system using 470-495 nm or 530-550 nm filters were used for excitation of GFP or mitotracker orange, and 510-550 nm or 575-625 nm filters were used for emission, respectively. The conforcal images were captured by an A1Rsi conforcal microscopy system with 0.15 um step using 488 nm or 567 nm semiconductor laser for excitation of GFP or mitotracker orange, and 525/50 nm or 595/50 nm filters were used for emission, respectively.


Second, we make proteoliposome which has the recombinant of yeast TIM23 complex and mix it in Signal for TIM23 complex::GFP which is translated by RTS. Then we will observe the localization of GFP fluorescence.




RTS reaction components volume /ul
sample No.12345
E.coli lysate1212121212
reaction mixture1010101010
amino acids mix1212121212
Methionine11111
Reconstitution Buffer55555
liposome
9

9
SEM
9
NFW
9
NFW
9
plasmid
1
NFW
1

1

1
NFW
1