Team:MIT/Projects/Project1

From 2009.igem.org

(Difference between revisions)
(Project Design)
Line 1: Line 1:
 +
[[Image:Bilibuddies_project1.png]]
__NOTOC__
__NOTOC__
-
<center>[[Team:MIT|Home]]|[[Team:MIT/Projects|Projects]]|[[Team:MIT/Protocols|Protocols]]|[http://partsregistry.org/cgi/partsdb/pgroup.cgi?pgroup=iGEM2009&group=MIT Parts for Registry]|[[Team:MIT/References|References]]</center>
+
<center>[[Team:MIT|Home]] | [[Team:MIT/Projects|Projects]] | [[Team:MIT/Protocols|Protocols]] | [http://partsregistry.org/cgi/partsdb/pgroup.cgi?pgroup=iGEM2009&group=MIT Parts for Registry] | [[Team:MIT/References|References]]</center>
 +
<hr>
 +
 
 +
 
 +
 
 +
 
=Metabolic Engineering of PCB Synthesis in Yeast=
=Metabolic Engineering of PCB Synthesis in Yeast=

Revision as of 03:05, 22 October 2009

Bilibuddies project1.png

Home | Projects | Protocols | [http://partsregistry.org/cgi/partsdb/pgroup.cgi?pgroup=iGEM2009&group=MIT Parts for Registry] | References



Metabolic Engineering of PCB Synthesis in Yeast

PCB factory.jpg

Background

Phycocyanobilin (PCB) is a chromophore essential for the physical interaction between two proteins, phytochrome PhyB and integrating factor PIF3. PCB has two conformations: active and inactive. In the inactive Pr conformation, PCB has the ability to absorb red light at a wavelength of 680 nm. Once PCB absorbs red light, it switches to the active Pfr conformation and enables PhyB to bind to PIF3. In the Pfr conformation, PCB has the ability to absorb near infrared light, at a wavelength of 720 nm. Once PCB absorbs the near infrared light, it switches back to the inactive Pr conformation and causes dissociation of PhyB from PIF3. Shown below is the structure of PCB and how it switches between conformations.

PCB Structure.gif Pr Pfr Cartoon.png

The synthesis pathway of PCB begins with Heme to biliverdin (BV) then to PCB. Heme is produced in a wide range of organisms. Our main goal is to create a strain of yeast able to progress down the PCB synthesis pathway as shown below.

PCB Biosynthesis Pathway.png
PCB biosynthesis pathway in Arabidopsis th. on the left and Synechocystis sp. on the right. Adapted from Gambetta, G. and Lagarias, JC., PNAS (2001)


In a 2002 Nature paper, the Quail Laboratory at University of California - Berekley used this PhyB-PIF3 system to induce LacZ expression. The GAL4 DNA-binding domain was fused to PhyB while the GAL4 activation domain was fused to PIF3. Once the system was pulsed with red light, LacZ expression was induced as shown below.

PhyB PIF3 LacZ Expression.png
Adapted from Shimizu-Sato, S., et al., Nature Biotechnology (2002)



Project Design

As mentioned above, PCB plays a crucial part in the PhyB-PIF3 system. We wanted to make this process self-sufficient. Therefore if the yeast was able to synthesize the PCB itself, it would not have to always be supplemented. So we decided to create an assay so if we our hypothesized processes were producing PCB. The basis of the process is shown below. If we would know the amount of PCB produced by the functional assay. The process was developed by the Quail lab at UC-Berkeley. The protocol for this functional assay can be found [http://openwetware.org/wiki/Functional_Assay_for_PCB here].


Donor-recipient.gif

Methods and Results

Developing the Standard: PCB from Spirulina

We decided to use a standard used in many other experiments involving phytochromes. Phycocyanobilin (PCB) extracted from Spirulina is a commonly used standard, as Spirulina produces a large amount of chromophores. We used Spirulina which was bought at Vitamin World as it is commonly used as a dietary supplement.

Chromophores have a very high absorbance around 680nm. A model of what the absorbance spectrum should look like is on the left, while the actual absorbance spectrum of PCB extracted from Spirulina following the [http://openwetware.org/wiki/Extraction_of_PCB_from_Spirulina protocol that the Quail Lab] used, is on the right.

Theoretical PCB Absorbance.png Actual PCB Absorbance.png


We were able to get a concentration of 11.214 mM in a 4.5 mL solution.


Engineering the PCB Synthesis Pathway into Yeast

HMX1 is a gene that we found that yeast already has. Enough BV is unfortunately not produced due to the fact that HMX1 is only transcribed under iron starvation conditions. For that reason we decided PCR HMX1 out of the genome and then place it on a plasmid with a much more powerful promoter, the promoter for ADH1. This plasmid is seen below.

HMX1 plasmid.png

The gene that we decided to follow was the PcyA gene, from the Synechocystis sp. genome. After looking at the codon usage charts for baker's yeast, and realized that we would need to do codon optimization to more effectively produce this enzyme in baker's yeast. The codon usage comparisons of PcyA before and after codon optimization, as done by GeneART, is seen below.

PcyA Usage.png

We synthesized this optimized PcyA using GeneART, and then cloned it into the plasmid, as shown below.

PcyA plasmid.png

With these two plasmids, we were planning to transform these into a yeast strain with the proper plasmids to be able to complete the functional assay. Unfortunately, there were a lot of problems in creating this functional strain, therefore we were unable to test whether or not these enzymes worked in yeast. As we guess that yeast would produce less PCB than Spirulina, we hypothesized that the previously described PCB isolation scheme would not be suitable. Therefore the functional assay is needed to see if yeast was being created or not.