Team:SupBiotech-Paris/Treatement modeling

From 2009.igem.org

Revision as of 22:50, 21 October 2009 by EmmaV (Talk | contribs)

framless


Contents

Modelling of DVS efficiency on a lung tumour

Context

Non-small cell lung carcinoma, or NSCLC, is an aggressive cancer, with a relatively high speed growth. Treatments are often ineficient, because the tumour growth is faster than the elimination by the drug

Objective

We have decided to model our treatment efficacy for this kind of tumour. Therefore we have modelled the tumour progression, our treatment evolution and efficacy. The objective of the modelling is to verify if our treatment is able to eliminate the entire tumour.

Back to top

Model segmentation

First, we had to recreate DVS complete mechanism and the tumour evolution. Then, for each step of the treatment, we have identified all the paramters that intervene, their actions and their interactions, in order to determine the model equations.

To simplifly the equation we have devided the mechanism and we have modelled each step separately.


Back to top

Tumor and DVS evolution versus time

First step : Tumour development according to time

We consider the tumour is non métastatic and its growth is exponential.
Let the tumour have a volume V1 in cm3 at an instant t1.
Let the same tumour, at an instant t2, have a volume V2.
The tumour is considered in exponetial growth phase and without metastasis therefore its development equation, Tumor Growth Rate (TGR), is equal to :

TGR.jpg

Thus, thetumour volume according to the time (V(t)) is equal to :

V(t).jpg

Finally, knowing the Average volume of a cancerous cell (Vcc) (experimental data), if we regard the tumour as fraught (without cavity or blood vessel), we can determine that the Number of cancerous cells according to time (Nc(t)), without treatment effect, is equal to :

N(c).jpg


Back to top

Second step : Development of the tissue vector

The tissue vector is injected to the patient at an instant t, near t2. The Number of injected vectors (Nbi) is 1x10^6. The pulmonary tropism of the vector isn’t perfect, only a Percentage (Pp) goes to the lung. The total number of tissue vector in the body increases, because this vector is bacterial and therefore possesses a Doubling period (DTB).
Thus we can establish that the tissue vector number in the lungs (Nb(t)) is equal to:

Nb(t).jpg

The number of Tissue vectors increases until injection of doxycycline. F rom then, tissue vectors lysis releases the cell vectors in the lung.

This injection time is not insignificant. Indeed, si if we wait long enough, tissue vectors number is sufficient to eliminate the tumour or at least to significantly reduce it. On the other hand, if we wait too long, a higher dose of doxycycline (and so potentially toxic) is necessary for cell vector release.

Thus we can use modelling to determine the optimal injection time of doxycyline (Tdox).


Back to top

Third step : Release of the cell vector

Once the doxycycline injected, the cell vector is released. The cell vectors number is proportional to the tissue vectors number in the lung. And yet, we know the average value of recombinant phage vectors released by M. avium (Npl) is equal to 100.
We can write cell vectors number at the injection instant (Np(Tdox)) is equal to :

Np(t)1.jpg

The cell vectors number does not increase such as the tissue vectors. Indeed, it decreases with time, because of the phage vector stability and of its cell penetration (to release the therapeutic plasmide).
Its stability in the blood is equal to the phage vector deterioration constant (kdeg) according to time. If we add this constant to the cell vectors number equation according to time (Np(t)) we obtain the following formula :

Np(t)2.jpg

The phage vector dispersion steps in the tumour and for cell penetration are the steps below Fourth and Fifth) because of their complexity.


Back to top

DVS Efficiency

So, we determined:

  • The size of the tumor versus time (initial volume + growth)
  • The amount of tissue vector versus time
  • The amount of released cellular vectors for a tissue vector

Now, we're going to determine the efficiency of our vectors for penetring cancer cells.
For that we are studying:

  • The area of dispersal vector cell
  • The importance of the cellular internalization of the vector in cancer cells.


Back to top

Fourth step : The cell vector dispersion

Here, we are looking for determine the maximum area that a phage can cover. This requires knowing:

        * The spread of phages in the bloodstream
        * Their diffusion through the walls of blood vessels
        * The surface of a cancer cell

For our modeling, we consider the blood as a Newtonian fluid with a constant velocity Vmax. Here, We neglect the heart-related jolts and turbulent flows caused by the cavities of the blood epithelium.

The cell vector moves along two axes. An X axis in the direction of blood flow and a Y axis orthogonal to the axis X.

In our model, we regard the blood as a newtonian fluid with a constant speed Vmax over time. We neglect the cardiac jolts and the turbulent flows related to the blood epithelium cavities.
The cell vector moves according to two axes. A X axe following the blood flow and an Y axe, orthogonal to the X axe.

RepèremouvementmécaniqueEn.png

The move in Y represents the phage vector diffusion in the blood. It depends on the equation of a particle (phage) diffusion in a fluid (blood).

EqDif.jpg

With n, the number of particles, and D, the diffusion ratio.

The move in X only depends on blood flow propagation in the vessel. Indeed, we neglect the diffusion that also occures according to the X axe because it is 1000 times inferior to the particles propagation in the blood (linked to the importance of the blood flow). Phages move with different speeds distributed in a parabolic way from Vmax in the vessel center, to V0 at the vessel edge.

RépartitionvitesseparaboliqueEN.png

Closing to the vessel edge, the phages speeds decrease because of friction forces.

We can therefore determine how long it takes for a particle with a Vmax speed to atteint l'extrémité. On obtient ainsi le temps nécessaire à l’internalisation de tous les phages d’une bactérie.

Lorsque l'on associe le déplacement en Y (vitesse de diffusion) et le déplacement en X (vitesse du flux sanguin), on obtient, après intégration sur le périmètre d'un vaisseau sanguin, la surface d’action des vecteurs cellulaires issus d’un vecteur tissulaire. On est alors capable connaître le nombre de cellules cancéreuses détruites pour 100 vecteurs cellulaires ou 1 vecteur tissulaire

La vitesse de diffusion du vecteur cellulaire, REDUITE A D (ADPRES SIMPLIFICATION ???)est égale à 0,5µm.s-1 or la taille d’un capillaire sanguin est de 10µm de diamètre. La particule la plus éloignée met donc 10s à atteindre la paroi du vaisseau.(CE QUI EST NEGLIGEABLE ETANT DONNE L'ECHELLE DE TEMPS OBSERVEE AVANT LA SYNTHESE DE P53).

Grâce à cette durée de diffusion (10s) et à la vitesse du flux sanguin (1x10^3µm.s-1) dans les capillaires, on peut déterminer :


L = 1 x 10^4 µm
2r = 10 µm
S = 2 π x L x r = 31,4x10^4µm²

Ainsi, un vecteur tissulaire peut potentiellement cibler plus de 31 000 cellules cancéreuses, or, il ne possède que 100 vecteurs cellulaires. On peut effectuer une simplification en disant que 100 vecteurs cellulaires détruisent 100 cellules cancéreuses et donc réduire l’équation de dispersion à une constante (NOM + VALEUR OU MOYEN DE DETERMINER LA VALEUR ??).

Pour le phage, une fois la paroi atteinte, entre en jeu l’internalisation cellulaire. Ce modèle répond à deux schéma d’action.


Back to top

Cinquième étape : L’internalisation du vecteur cellulaire

Une fois au contact de la cellule, le vecteur cellulaire a deux schémas d’action possibles.

  • Le vecteur se fixe puis il se détache de la cellule.
  • Le vecteur se fixe puis il se fait internaliser au sein de la cellule.

On peut modéliser cela en fonction du temps et des Constantes d’Association (kon) , de Dissociation (koff) et d’Internalisation (kint) .

On obtient ainsi:
EqInt.jpg

Les étapes les plus courtes, en échelle de temps, sont certainement les étapes concernant le phage. L’internalisation est la plus courte d’entre elle, après avoir déterminé les constantes, on sait que plus de 320 vecteurs cellulaires sont internalisés par seconde au contact d’une paroi.
En raison des échelle de temps, en heure, on peut réduire cette équation en fonction du temps à une simple constante.(UNE CONSTANTE NE DEPEND PAS DU TEMPS donc : kon, koff et kint forment une seule constante égale à 320 ? Ou c'est IDP qui devient une constante ?)


Une fois internalisé, le plasmide thérapeutique engendre l’apoptose de la cellule en 1h, diminuant le nombre de cellule cancéreuse, Nc(t), et le volume tumoral, Vc.


Back to top

Evolution en simultanée du DVS et d'une tumeur

L’équation d'évolution de notre modèle en fonction du temps est égale à :

EqFinale.jpg
float

Avec :

- Nc(t), le nombre de cellules cancéreuses dans le temps,
- V(t), le volume tumoral,
- V1 et V2, deux volumes tumoraux à respectivement des temps t1 et t2,
- Vcc, le volume d’une cellule cancéreuse,
- Nbi, le nombre de vecteurs tissulaires injectés,
- Pp, le pourcentage pulmonaire de vecteurs tissulaires par rapport à la dose injectée,
- DTB, le temps de doublement du vecteur tissulaire,
- tinj, le temps d'injection du vecteur tissulaire,
- Npl, le nombre de vecteurs cellulaires libérés par bactérie.

On peut négliger (aux vues des différences entre les échelles de temps ou d’espace) certains facteurs :

- Kdeg, la constante de dégradation du phage, car tous les phages sont internalisés en 10s.
- D, la diffusion du phage et IDP, l’internalisation cellulaire, car on considère que 100 phages rentrent dans 100 cellules différentes (pour une valeur potentielle de 31400) donc tout cela est égal à 1.


Back to top

Simulation de traitement


Back to top .