Team:Valencia/Hardware

From 2009.igem.org

(Difference between revisions)
Line 12: Line 12:
=='''LEC activation'''==  
=='''LEC activation'''==  
<br>
<br>
-
Our team prides itself in finding ways to link electronics to biology in a direct and innovative fashion. As a consequence we spent considerable time developing circuits and equipment allowing for quick and robust control of cellular physiology.
+
Our team prides itself in '''finding ways to link electronics to biology in a direct and innovative fashion.''' As a consequence we spent considerable time developing circuits and equipment allowing for quick and robust control of cellular physiology.
<br><br>
<br><br>
<!-- cite -->
<!-- cite -->
Line 18: Line 18:
==='''Electrostimulation for yeast'''===
==='''Electrostimulation for yeast'''===
-
Our team has developed '''an electronic circuit''' capable of applying a voltage between 0 V and 24 V with a precision of 0.1 volts and during time intervals of up to 20 ms. to yeast cultures. This circuit has been used in a first stage to characterize the part [http://partsregistry.org/wiki/index.php?title=Part:BBa_K222000 BBa_K222000] or what we call LEC. In the characterization, this system supplies the initial estimulation conditions for the cells for [https://2009.igem.org/Team:Valencia/WetLab/YeastTeam/Results the different experiments] very precisely, making the results obtained with the luminometer of great confidence.<br>   
+
Our team has developed '''an electronic circuit''' capable of applying a '''voltage between 0 V and 24 V with a precision of 0.1 volts and during time intervals of up to 20 ms.''' to yeast cultures. This circuit has been used in a first stage to characterize the part [http://partsregistry.org/wiki/index.php?title=Part:BBa_K222000 BBa_K222000] or what we call LEC. In the characterization, this system supplies the initial estimulation conditions for the cells for [https://2009.igem.org/Team:Valencia/WetLab/YeastTeam/Results the different experiments] very precisely, making the results obtained with the luminometer of great confidence.<br>   
The experimental device is composed of the following parts:<br>
The experimental device is composed of the following parts:<br>
-
*The first one is made of a voltage source and two electrodes to stimulate the cultures.
+
*The first one is made of '''a voltage source and two electrodes''' to stimulate the cultures.
-
*The second one is an optocoupler performing the function of an electronic switch. It is composed of a led diode and a phototransistor. The phototransistor will allow to voltage signal while the diode is illuminated.
+
*The second one is '''an optocoupler performing the function of an electronic switch'''. It is composed of a led diode and a phototransistor. The phototransistor will allow to voltage signal while the diode is illuminated.
-
*The last part is the responsible of the fine control of the time period in which the voltage is applied. To do that we stimulate the diode with a PC sound card (it has a precise voltage signal that is transformed by the loudspeakers to reproduce sound) controlled by the function “sound” of the MatLab software.<br>
+
*The last part is '''the responsible of the fine control of the time period in which the voltage is applied'''. To do that we stimulate the diode with a PC sound card (it has a precise voltage signal that is transformed by the loudspeakers to reproduce sound) '''controlled by the function “sound” of the MatLab software'''.<br>
-
The output signal of the sound card was modified by a rectifier-filter and then passed through two operational amplifiers (one as an amplifier and the other as a tension follower) in order to produce a very precise signal able to activate the optocoupler. The amplifiers are powered by 5 volts and ground, so we will have 5 volts at the output of the operational when the sound card is active, and 0 volts when idle.
+
The output signal of the sound card was modified by a rectifier-filter and then passed through two operational amplifiers (one as an amplifier and the other as a tension follower) in order to produce '''a very precise signal able to activate the optocoupler'''. The amplifiers are powered by 5 volts and ground, so we will have 5 volts at the output of the operational when the sound card is active, and 0 volts when idle.
[[Image: V_ElectroYeast.png|700px]]
[[Image: V_ElectroYeast.png|700px]]
<br><br>
<br><br>
-
This design allows the stimulus of one channel, one LEC. In order to make a working screen, we will need an array of electrodes connected to a multiplexer. For taht, see [https://2009.igem.org/Team:Valencia/Hardware/iLCD the next section...]<br><br>
+
'''This design allows the stimulus of one channel, one LEC. In order to make a working screen, we will need an array of electrodes connected to a multiplexer'''. For that, see [https://2009.igem.org/Team:Valencia/Hardware/iLCD the next section...]<br><br>

Revision as of 00:29, 22 October 2009



LEC activation


Our team prides itself in finding ways to link electronics to biology in a direct and innovative fashion. As a consequence we spent considerable time developing circuits and equipment allowing for quick and robust control of cellular physiology.


Electrostimulation for yeast

Our team has developed an electronic circuit capable of applying a voltage between 0 V and 24 V with a precision of 0.1 volts and during time intervals of up to 20 ms. to yeast cultures. This circuit has been used in a first stage to characterize the part BBa_K222000 or what we call LEC. In the characterization, this system supplies the initial estimulation conditions for the cells for the different experiments very precisely, making the results obtained with the luminometer of great confidence.

The experimental device is composed of the following parts:

  • The first one is made of a voltage source and two electrodes to stimulate the cultures.
  • The second one is an optocoupler performing the function of an electronic switch. It is composed of a led diode and a phototransistor. The phototransistor will allow to voltage signal while the diode is illuminated.
  • The last part is the responsible of the fine control of the time period in which the voltage is applied. To do that we stimulate the diode with a PC sound card (it has a precise voltage signal that is transformed by the loudspeakers to reproduce sound) controlled by the function “sound” of the MatLab software.

The output signal of the sound card was modified by a rectifier-filter and then passed through two operational amplifiers (one as an amplifier and the other as a tension follower) in order to produce a very precise signal able to activate the optocoupler. The amplifiers are powered by 5 volts and ground, so we will have 5 volts at the output of the operational when the sound card is active, and 0 volts when idle.

V ElectroYeast.png

This design allows the stimulus of one channel, one LEC. In order to make a working screen, we will need an array of electrodes connected to a multiplexer. For that, see the next section...