Team:Todai-Tokyo/Notebook/LDLR

From 2009.igem.org

Revision as of 13:45, 20 October 2009 by Chie (Talk | contribs)
UT.png
Home The Team The Project Parts Submitted to the Registry Modeling Notebook Protocols Ethics



the notebook

Contents

Plan

Aim: Create yeast cells that express LDLR on their cell membrane

Methods:

  1. Clone the LDLR gene.
  2. Create biobrick of LDLR.

7/6

Overview:
1.PCR LDLR gene from plasmid containing LDLR cDNA
2.gel-purify DNA from the PCR product
3.insert the DNA to vector (iGEM parts)
4.transform into E. coli and select for ampicillin resistance
5.check for transformation success using colony PCR by LDLR primers

Constructs to be created:
pGal1-Kozak-LDLR-terminator
Obtaining DNA:

Resuspended DNA in the following wells with 10ul water:

plate 1 7D
pGal1(including Kozak sequence)
[http://partsregistry.org/wiki/index.php?title=Part:BBa_J63006 Gal1 promoter]
Transformed 1ul of each of the above into DH5a competent cells:

Transformation

  • Mix 1ul of DNA with 100ul of competent cells on ice.
  • Leave on ice for 30 minutes.
  • Heat shock at 42ºC for 45 seconds.
  • Leave on ice for 2 minutes.
  • Add 500ul of LB and incubate at 37ºC for 1 hour.
  • Plate on LB-ampicillin plates.

7/7

Miniprep of E.coli cells containing LDLR gene with Promega, Wizard Plus SV Miniprep DNA Purification System

Successful

7/19

PCR of LDLR

0.4ul 50uM 5’primer
0.4ul 50uM 3’primer
1.6ul 2.5mM dNTP
2ul 10×Pfu Ultra 2 buffer
0.05ul LDLR plasmid
0.5ul Pfu Ultra
15.05ul MilliQ water

Performed PCR using the following program:
1. 95ºC 2min
2. 95ºC 30sec
3. 55ºC 30sec
4. 72.5ºC 60sec
5. repeat 2-4 29times
6. 25ºC forever

PCR successful
We cut the region of LDLR out of the gel and purified PCR product using Promega kit.

infusion of LDLR

4ul PCR product (12.35ug/ml)
3ul vector (iGEM parts plate1 D-3, 14.95ug/ml)
2ul 5×infusion reaction buffer
1ul infusion enzyme

37ºC 15min
50ºC 15min

TE buffer up to 20ul

added 10ul of the sample to DH5α (090614) and put on ice for 15 min.

42ºC 45sec

added 500ul LB broth to the tube.

placed it on LB ampicilin plate.

7/20

colony PCR

put a small amount of single colony into each tube with 5ul MilliQ water

95ºC 5min

PCR reaction
1ul 10×buffer
0.8ul 2.5mMdNTP
0.08ul Ex-Taq
0.1ul 5’-primer
0.1ul 3’-primer
2.92ul MilliQ water

added the PCR reaction to each tube.

Performed PCR using the following program:
1. 95ºC 2min
2. 95ºC 30sec
3. 55ºC 30sec
4. 72.5ºC 120sec
5. repeat 2-4 29 times
6. 25ºC forever

PCR unsuccessful・・・.


7/25

gal1 sequencing by BIG DYE

1.8ul 5xB.D.3.1.buffer
0.4ul B.D.3.1.
6.3ul MilliQ water
1ul plasmid(0.15ug/ul)
0.5ul 5'or3'primer(3.2pmol/ul)

PCR Program
1.96ºC 2min
2.96ºC 10sec
3.55ºC 5sec
4.60ºC 3min
5.go to 2.29times
6.25ºC forever

add 0.5ul PHOSPHATASE ALKALINE shrimp

37ºC 1hr incubate

add 1ul 3MNaOAc

add 25ul EtOH

20000xg 4ºC 10min centrifugation

put off supernatant

dry tubes

add 15ul HiDi

put them in the sequence machine

7/26

colony PCR again, using 7/20 protocol.
PCR program
1.95ºC 2min
2.95ºC 30sec
3.55ºC 30sec
4.72.5ºC 150sec
5.go to 2. 29times

but,unsucessful.

7/27

Miniprep of E.coli cells containing LDLR gene(that yesterday picked up and cultured) with Promega, Wizard Plus SV Miniprep DNA Purification System
using AGE, found a colony that has LDLR infusion plasmid


7/30

  • seaquensing of LDLR

August

PCR of GFP for fusion
program
1.95ºC 2min
2.95ºC 30sec
3.55ºC 30sec
4.72.5ºC 20sec
5.go to 2. 29 times
6.25ºC forever

We found that the length of these PCR product till now was longer than that of LDLR.

  • read the sequence of LDLR cDNA→the result didn't conform with NCBI datebase
  • change PCR program→didn't get the PCR product whose length was correct

8/1

  • read the sequence of F-spe1-Gall p-LDLR-5
  • read the sequence of F-pst1-Gall p-LDLR-3

8/2

  • seaquensing of LDLR


8/4

The following were sequenced using the labeled primers:

  • 1)F-spe1-Gall p-LDLR-5
  • 2)F-pst1-Gall p-LDLR-3

Results:
Sequence read failed

8/5

  • Transformation of plate1-9G

8/6

  • Miniprep of plate1-7M
  • Miniprep of plate1-7E
  • Miniprep of plate1-9C
  • PCR of LDLR1
  • PCR of LDLR2

LDLR1 and LDLR2 is combination of Gal1, LDLR and GFP.

8/7

  • PCR of LDLR

using the labeled primers:

  • 1)F-spe1-Gal1-LDLR-5'
  • 2)F-spe1-Gal1-LDLR-3'


  • PCR of GFP

using the labeled primers:

  • 1)F-spe1-Gal1-LDLR-GFP-5'
  • 2)F-pst1-Gal1-LDLR-GFP-3'

8/8

  • Transformation of P3 21D
  • Transformation of P1 23L


  • PCR of LDLR

using the labeled primers:

  • 1)F-spe1-Gal1-LDLR-5'
  • 2)F-spe1-Gal1-LDLR-3'

using the following program;

program
1.95ºC 2min
2.95ºC 30sec
3.52~55ºC 30sec
4.72.5ºC 60sec
5.go to 2. 29 times
6.25ºC forever

Result;
The length of LDLR is about 2583 bp.

  • PCR of LDLR

using the labeled primers:

  • 1)F-spe1-Gal1-LDLR-5'
  • 2)F-spe1-Gal1-LDLR-3'

using the following program;

program
1.95ºC 2min
2.95ºC 30sec
3.57ºC 30sec
4.72.5ºC 60sec
5.go to 2. 29 times
6.25ºC forever

The change point of this program is the temperature at third step.
This temperature is 57ºC but previous is 52~55ºC.

result;
The length of LDLR is 2500~3000bp.

8/9

  • PCR of LDLR

8/10

  • Sequencing of LDLR

The following were sequenced using the labeled primers

1)1D-LDLR-5'
2)1D-LDLR-3'

Results:
Sequence read failed


  • PCR of LDLR(1st time)

using the labeled primers:
1)F-spe1-Gal1-LDLR-GFP-5'
2)F-spe1-Gal1-LDLR-GFP-3'

using the following program;

program
1.95ºC 2min
2.95ºC 30sec
3.55ºC 30sec
4.72.5ºC 60sec
5.go to 2. 29 times
6.25ºC forever

Result;
PCR is sucessful.

  • PCR of LDLR(2nd time)

using the labeled primers is same as 1st time's:

using the following program;

program
1.95ºC 2min
2.96ºC 30sec
3.55ºC 30sec
4.60.0ºC 3min
5.go to 2. 29 times
6.25ºC forever

September

We got new LDLR cDNA!

  • look for the best PCR program

→DMSO 5% or 10%
→annealing temparature 55ºC or 60ºC

result
the best program
10% DMSO
1.95ºC 2min
2.95ºC 30sec
3.60ºC 30sec
4.72.5ºC 1min
5.go to 2. 29 times
6.25ºC forever
purify the PCR product using Promega kit and insert it in iGEM part(plate1-7D:Gal1 promoter)
And, insert it and GFP in iGEM part(plate1-7D:Gal1 promoter)

9/25

  • Miniprep of E.coli cells containing lacI gene, araC gene, and GFP gene (those yesterday picked up and cultured) with Promega, Wizard Plus SV Miniprep DNA Purification System
  • read the sequence of LDLR cDNA


failed


10/5

  • check of plasmids including LDLR by AGE

1.LDLR3 091004
2.LDLR5 091004
3.LDLR+GFP 1 091004
4.LDLR+GFP 2 091004
1&2->OK,3&4->wouldn't have LDLR+GFP

  • sequence

1.LDLR3 091004
2.LDLR5 091004
3.LDLR+GFP 1 091004
4.LDLR+GFP 2 091004
5~10.YCplacIII(whose restriction site may be changed)
primer
1~4:P1-7Dseq.5'or3'
5~10:YCplacIII seq. primer5'or3'

  • PCR for LDLR+GFP fusion(Pfu UltraII)

template:HEP-LDLR cDNA
primer:
F_S_Gal1_LDLR_5'new
F_P_GAl1_LDLR_GFP_5'

10/7

  • PCR for GFP fusion(Pfu UltraII)

primer
F_S_Gal1_LDLR_GFP_5'
F_P_Gal1_LDLR_GFP_3'

10/8

1. PCR of Gal1+LDLR
P1-7D seq5'
P1-7D seq3'
(Pfu ULtraII)

10/10

  • YCplacIII quick change

PCR
YCplacIII5'
YCplacIII3'

10/11

  • PCR

template:HEP-LDLR cDNA
primer:
F_S_Gal1_LDLR_5'new
3'-GFP

  • sequence

LDLR5
LDLR3

10/12

1. sequencing

  • LDLR
  • P2,10F
  • YCplac111
  • Gal1

2. PCR LDLR from HEP

10/13

1. PCR

  • LDLR + GFP
  • LDLR

10/15

1. sequencing

  • LDLR

10/16

1. PCR

  • LDLR
  • YCplac111

2. Restriction Enzyme digestion

  • YCplac111 with E,P
  • YCplac111 with X,P

3. Colony PCR

  • LDLR + GFP
  • LDLR + P1,7D


UT.png
Home The Team The Project Parts Submitted to the Registry Modeling Notebook Protocols Ethics