"
Team:Valencia/Hardware/iLCD
iLCD: LEC array
We have characterized the light response of yeast to electrical pulse stimulation and according to that characterization we have established the refreshing time in approximately 10 s. (see [experimental results] section). After that, we considered to control an array 96 totally independent pixels (or cell cultures), in such a way that they can work cooperatively creating animated pictures. This system constitutes the first screen that works with living cells.
Two problems must be solve before we can have our iLCD: controlling each pixel independently and be able to control the cooperative work of each pixel according an input.
1) building 96 pixels support.
Our screen is a matrix of 8 columns by 12 rows. Thus, the circuit must allow to decide which row and column we want to activate at all times through an adquisition data card with 24 digital outputs, one per row and column. For example, to turn the cell in position 3,4 of the screen, activate the outputs corresponding to row 3 and column 4. The card is controlled by a program executed in LabVIEW.
2) Controling the system.
We have developed a system capable of selectively controlling the input of amplitude- and time-varying electrical pulses to a 24 channel-wide [http://sine.ni.com/nips/cds/view/p/lang/en/nid/201630 data acquisition card]. These pulses are the signal for the coordinated switch on and off of an array of pixels (let them be Diodes, LEDs, or Cells, LECs). The system is capable of reproducing different black and white images that will be transmitted to the pixel resulting in animated pictures.
In order to design and build this device a LabVIEW program has been implemented to divide each desired image (jpg file) in 96 parts. Depending on the colour intensity of each part, our program sends simultaneously through the data acquisition card (connected to a laptop through USB) a voltage signal that permits the activation of the corresponding pixels.
.
iLCD recipe
Material you will need in order to build your own iLCD:
- a laptop
- a data acquisition card National Instruments 6501 USB (or anyone with the same characteristics)
- our LabView program
- images you want to animate
- Light Emitting Cells (LECs)
