Team:Imperial College London/Thermoinduction

From 2009.igem.org

Revision as of 20:41, 21 October 2009 by Tywang (Talk | contribs)

Contents

Module Integration - Thermoinduction



II09 thermo transition.jpg

Overview

When sufficient protective coating has been made, the temperature of the system is raised to 42°C. This activates the thermosensitive promoter, consequently triggering Module 3.

Rationale

II09 capsule penetration2.jpg

After encapsulation, it becomes more difficult for normal chemical induction to penetrate the outer protective coating. To tackle this problem, heat induction is used. Heat induction is, in addition, a commonly used and highly reproducible induction method in industrial scale manufacturing processes.

The thermosensitive cI promoter is chosen as it is widely cited in literature for efficient thermoinduction of systems [1], and has been proven to work well in commonly available plasmids. [http://partsregistry.org/Part:BBa_K098995| BBa_K098995], in particular, is the only construct for the thermosensitive cI system in the registry and has already been characterised previously.

The system

Ii09 thermo2.jpg

The lambda promoter ([http://partsregistry.org/wiki/index.php?title=Part:BBa_R0051| R0051]) is strongly repressed at 28 degrees by the cI repressor([http://partsregistry.org/wiki/index.php?title=Part:BBa_K098997| K098997]). Therefore, at 28 degrees, the thermoinducible system has no activity.

However, this cI repressor is unique in that it is temperature-sensitive, and will readily lose its functional structure as the temperature increases. Therefore, when the temperature is raised to 42°C, the lambda promoter is no longer repressed and can trigger Module 3.

  About the thermoinduction system

Characterisation of existing biobrick

The thermoinducible construct ([http://partsregistry.org/Part:BBa_K098995| BBa_K098995]), an existing biobrick, is characterised by ligating it to GFP. The cells are grown at the low temperature of 28°C where the promoter is inactive. The temperature is then shifted up to 42°C. The GFP fluorescence is monitored throughout as an indicator of promoter activity.
II09 Hvd-GFPfluor2.jpg

The GFP fluorescence is shown to be at baseline when cells are grown at 28°C. However, when the cells undergo a temperature shift to 42°C, there is an almost immediate increase in GFP fluorescence.

This shows that the activity of the lambda promoter does increase when the temperature is shifted up, so the thermoinducible construct ([http://partsregistry.org/Part:BBa_K098995| BBa_K098995]) does become activated by higher temperatures.


  About our wet lab results


References

[1] Wolfgang Jechlingera*, Michael P Szostaka 1 , Angela Wittea, Werner Lubitza (1999) Altered temperature induction sensitivity of the lambda pR/cI857 system for controlled gene E expression in Escherichia coli. FEMS Microbiology Letters. 173(2), pp 347 - 352


Project Tour



Mr. Gene   Geneart   Clontech   Giant Microbes