"
Team:Valencia/Hardware
LEC activation
Our team prides itself in finding ways to link electronics to biology in a direct and innovative fashion. As a consequence we spent considerable time developing circuits and equipment allowing for quick and robust control of cellular physiology.
- Electrostimulation for yeast
Our team has developed an electronic circuit capable of applying a voltage between 0 V and 24 V with a precision of 0.1 volts and during time intervals of up to 20 ms. to yeast cultures. This circuit will be used in a first stage to characterize the part BBa_K222000 or what we call LEC. In the characterization, this system supply the initial estimulation conditions for the cells for the different experiments very precisely, making the results obtained with the luminometer of great confidence.
The experimental device is composed of the following parts:
The first one is composed of a voltage source and two electrodes to stimulate the cultures.
The second one is an optocoupler performing the function of an electronic switch. It is composed of a led diode and a phototransistor. The phototransistor will allow to pass the voltage signal meanwhile the diode is illuminated.
The last part is the responsible of the fine control of the time period in which the voltage is applied. To do that we stimulate the diode with a PC sound card (it has a precision voltage signal that usually is transformed by buffers to reproduce sound) controlled by the function “sound” of the MatLab software.
The output signal of the soundcard was modified by a rectifier-filter and then passed through two operational amplifiers (one as a amplifier and the other as a tension buffer) in order to produce a very precise signal able to activate the optocoupler. The amplifiers are powered by 5 volts and ground, so we will have 5 volts at the output of the operational when the sound card is active, and 0 volts when idle.
