Categories :

Home Team Sponsors Parts Submitted to Registry Image Gallery Leave a Message!

Project :

Overview Sensitivity Tuner --- Characterisation --- Modelling Colour Generators --- Carotenoids (Orange/Red) --- Melanin (Brown) --- Violacein (Purple/Green) The Future Safety

Notebook :

Week 1 Week 2 Week 3 Week 4 Week 5 Week 6 Week 7 Week 8 Week 9 Week 10

Team Logistics :

Protocols Stock List Research Shared Links and Help

Week 5

Monday

Dry Work

Violacein Synthesis

Used GeneDesigner from DNA2.0 to plan what we wanted synthesised, taking into account the different genes in the operon. This would be synthesised with codon optimisation for E. coli. All forbidden restriction sites have been removed (EcoRI, XbaI, SpeI, PstI, NotI)

Data Analysis

Produced a plot making program, producing subplots across cell type and repeats for all measurements.

Wet Work

Protocol de-bugging

For the amplification project, we need to amplify pSB3K3 as a low-copy number plasmid vector in order to transfer the activator constructs into low copy number plasmid. We tried 4 different PCR reaction mixtures, and used a Zymogen PCR wash kit before running them on an 0.8% Agarose E-gel. After looking at the gel, the ladder was quite smeared and no PCR product was visible. It was found that the samples run on the gel had a very low DNA concentration. However, some PCR solution was left before the wash kit was used, and using the Nano-Drop it was determined that it had a high concentration of DNA, so the PCR worked, we just need to refine the protocols after PCR.

Amplification

Mini-prepped I746374, I746375, I746380, and I746391; incubated overnight cultures of the rest of the 11 activator constructs in preparation for miniprep.

Pigments

Melanin

Retransformed melanin plasmid into Top10, and transformed it into MG1655 to (hopefully) achieve better expression. Plated on plates optimized for pigment production, and prepared for solid-phase pigment extraction

Violacein

Retransformed violacein plasmid into Top10, and transformed it into MG1655 to (hopefully) achieve better expression.

Mixing pigments

Plated Top10 transformed with melanin plasmid and violacein plasmid and the Roche strain transformed with Duncan’s orange plasmid on the same plate, optimized for melanin production (as this is the only pigment that requires media supplementation) but without any antibiotic resistance.

Progress on Carotenoids (Monday)

Today we carried out restriction digest of K118006/CrtB (as recipient plasmid vector) using SpeI and PstI (two cuts both within suffix), and of K118005/CrtI (as gene insert) using XbaI and PstI (one cut within prefix, the other cut within suffix).

Recall that the sizes are: K118006/CrtB: insert: 949bp, backbone: 2079bp, total: 3028bp. K118005/CrtI: insert: 1498bp, backbone: 2079bp, total: 3577bp.

Hence we expect one band of about 3000bp for K118006/CrtB, and two bands of about 1500bp and 2100bp for K118005/CrtI, after restriction digest with their respective enzymes.

The restriction digest products were run on gel, and the results were shown below:

Lane 1: Log-2 DNA ladder (NEB). Lanes 2 and 3: Restriction digest products of K118006/CrtB (less DNA loaded in lane 3). Lane 4: Undigested K118006/CrtB (negative control). Lane 5 empty. Lane 6: Restriction digest products of K118005/CrtI. Lane 7: Undigested K118005/CrtI (negative control).

This indicated that the restriction digest was successful.

We then carried out gel extraction on Lane 2 and Lane 6, ligation with T4 ligase, and electroporation into E. coli Top10 cells. Results of transformation will be ready for inspection tomorrow.

Tuesday

Dry Work

Violacein gene

Confirmed that correct protein sequence was present for each gene, by using MUSCLE to compare the gene sequence given by GeneDesigner to the sequence in the NCBI database. All protein sequences were identical.

Prepared the GeneDesigner file and the ApE file of the violacein operon to be sent for sequencing. Jim suggested that we refactor the DNA so that each individual ORF is preceeded by an RBS (the biobrick part B0034) and a constituitive promoter added. DNA2.0 kindly agreed to provide the promoter sequence for us, and add it in along with the operon. We also included the vio E gene after reading the Sanchez paper: http://www3.interscience.wiley.com/cgi-bin/fulltext/112732008/HTMLSTART?CRETRY=1&SRETRY=0

New Vio Plan

The protein structures given for each gene were also compared with vio proteins from other organisms, ( Janthinobacterium lividum and Duganella sp. B2) to confirm that the ORFs were coding for the correct protein.

Modelling

Using our model for the rate of transcription from pBAD, dependent on arabinose concentration:

, where

we discussed how this model would behave, and how to determine the parameters.

The behaviour of this model to changing arabinose concentrations is shown in these graphs

Wet Work

Amplification

Continued to refine protocols for successful PCR and purification of pSB3K3; tried 4 different PCR mixtures, all of which were successful.

Miniprepped all remaining amplifier constructs.

Pigments

Yesterdays transformations were successful, continued to incubate to trigger pigment production.

Wednesday

Dry Work

Pseudomonas Green and Red

Received confirmation that we will be receiving clones containing the appropriate plasmids (YAY) soon.

Violacein

Removed restriction sites from the new vio plan (shown on yesterdays page) and send it to Jim, along with the ApE plasmid editor file of the operon. After getting the go-ahead from Jim, this plan will be send to DNA2.0 for synthesis. Drafted the design criteria for Violacein synthesis:

• The gene consists of five open reading frames (vioA-E) each preceded by a ribosome binding site (part B0034). The whole sequence is held within the BioBrick registry prefix and suffix
• The DNA sequence of the prefix and suffix CAN NOT be altered in any way
• Ideally the operon would be under the control of the repressible promoter suggested by Jeremy. This promoter would be upstream of the operon and ribosome binding sites, but downstream of the prefix
• With the exception of the prefix and suffix (which cannot be altered) the following restriction sites are forbidden within the operon: EcoRI, XbaI, SpeI, PstI, NotI
• If possible, we would like the genes to be optimised for E. coli and preferably B. subtilis as well
• In order to easy gene separation, we would like restriction sites on either side of the vio C and the vio D genes.

Modelling

We have now developed several versions of our model for the amplifier. These involve a simple model, positive feedback, degradation of the activator protein, and dependence purely on input transcription rather than inducer concentration.

Our results for the positive feedback latch: our continuous model indicates that whatever the transcriptional input, the reporter is produced in the same way. This means that the latch would be switched at any input level. We plan to look at stochastic modelling to see if the same applies here.

We produced several graphs to show what happens when different parameters are changed for the latch. The most important is the following, showing the very small effect of changing transcriptional input - encapsulating the effect of different arabinose concentrations.

Data Analysis

We now have fluorescence rate calculated for all runs, and have normalised this for od. The next step is to take the steady state fluorescence rate per cell, and plot this against arabinose concentration. This should allow us to show the effect of the amplifier construct.

Wet Work

Pigment Stocks

Retransformed melanin and violacein pigment into MG1655 (previous attempt was unsuccessful)

Melanin Biobrick

Did a PCR to amplify the melanin fragment that will be made into a BioBrick. Purpose was to measure the length of the MelA fragment, check that the A and F primers were functional (as they are used in every PCR cycle in the plan), and produce samples for testing our different DNA clean-up protocols. We used the Finnzymes MasterMix with added DMSO and ran on an ethidium bromide gel.

Gel was run at 80V for 45mins. The two samples were made of the same master mix (as in Finnzymes PCR protocol) with added 1.5ul of DMSO to each 50ul sample. The bands are approximately 2kb, which matches the 1.9kb size of the melA fragment. The smaller bands near the bottom of the gel are the primers.

Amplification

Made glycerol stocks for -20 freezer of all activator constructs.

Continued to de-bug DNA clean-up after PCR, PCR amplified more pSB3K3.

Thursday

Dry Work

Data Analysis

• For each data set, the maximum normalised fluorescence rate was taken. This is the measurement used to calculate Relative Promoter Units, and by extention, RNA Polymerase per second (PoPS). These data were plotted for each cell type against concentration of arabinose:

The most important graphs above are those for GFP in cells 40 (pBAD) and 91 (amplifier). These are effectively the input and output for the amplifier device. One can see that the pBAD curve has no real increase until at least 10μM, whereas an equivalent large increase for the amplifier starts at about 1μM. Very low level transcription can be seen to be amplified. The amplified graph (91) starts to drop off at high concentrations: this may be due to toxicity.

• Next, in order to remove the effect of pBAD, the gain (ratio output/input) at each concentration was calculated:

This graph shows that the amplifier has steady gain at low concentrations. The point at "0.01" is actually that for zero, showing the basal amplification. What is interesting in this graph is that the gain drops off, well before the reduction of expression for cells 91. This is because cells 40 start to rise here.

• Finally, in order to fully abstract the behaviour of the amplifier device from arabinose concentration, the output signal was plotted directly against the input signal:

A linear device would have a straight line here. Instead we observe a rapid increase in output at a low range of input, followed by a plateau, then a decrease at higher input. There is scope for the device to be used in both discrete and continuous applications.

Wet Work

Amplification

Overnight culture of a single colony of J69591, phenotypically confirmed, in preparation to make glycerol stocks, steak out on a plate, and miniprep. This will be the parent colony for all of our characterizations.