• Home
• Team
• Project
• Parts
• Modelling
• Sponsors
• Lab Book

Project

• Overview
• Choices Rationale
• Characterisation
• Safety
• Judging Comments

Sub-projects

• Metal Intake/Efflux
• Metal Sensing
• Sporulation Tuning
• Population Dynamics
• Stochastic Switch
• Metal Sequester
• Chassis
• Promoter Library

Wet Lab

• Lab Book
• Protocols

Meetings

• Meetings Calendar

Planning

• Timeline
• Ideas

Links

• Helping other teams
• Ethics
• T-Shirts
• iGEM Meetup
• Our City
• Fun and Games
• Sponsors
• Useful Links
• Contact Us
• Press Coverage

Contents 1 Lab Session 12/08/09 1.1 Stochastic Switch Team 1.2 Sporulation Tuning/Chassis Team 1.2.1 Preparation 1.2.1.1 L-alanine 1.2.2 Protocol

Lab Session 12/08/09

Stochastic Switch Team

Today we are trying to transform Bacillus subtilis with gfp-rrnb integration vector. Metal sensor team kindly inoculated B. subtilis cells into flask tubes and placed them into the shaking incubator. We labelled them as 1,2,3 and control.

We prepared four plates

• LB + Bsubtilis (+ Control, cells should grow on this plate)
• LB + CHL + B. subtilis (- control, cells will not grow on this plate)
• LB + CHL + B. subtilis + plasmid DNA(Cells should transform with the DNA)
• LB + CHL + B. subtilis + diluted plasmid DNA (Cells should transform with the DNA)

• 2xcompetence medium and 2xstravation medium were prepared.
• We used the 2nd and the 3rd tubes for the tests
• Incubated the samplesfor three hours at 37C
• Added the starvation medium and incubated for another 2 hours
• For each of the two cultures, added 0.4ml of the final solution from the culture and 10ul of DNA into an eppendorf tube.
• Placed the tubes in the shaking incubator for an hour. To do this we taped the tubes to the base of the incubator. N.B- Chris in the lab swapped the temperatures of the incubators, so we used the one that is opposite the -80 freezer. The starter overnight cultures are also in this incubator -these are labelled 1,2,3 control (we used 2 and 3).
• The cultures were plated out using glass beads and put in the 37 incubator.

Sporulation Tuning/Chassis Team

Today, we made our first attempt to recover the cwlD spores which were kindly sent to us by Anne Moir from Sheffield University as mentioned on the 4th of August.

We used the protocol for Method A as mentioned.

Preparation

L-alanine

We need:

10mM L-alanine
0.01M L-alanine

We made 0.03L (30ml)of 0.05M L-alanine which we filter sterilised.

The amount of powdered L-alanine needed to make 30ml of 0.05M L-alanine solution is:

MW * Desired Volume (L) * Desired Molarity (M) 
89.09* 0.03L * 0.05M = 0.134g 

Our final solution volume inclusive of L-alanine is desired to be 1ml. Therefore, the amount of L-alanine stock solution to add, such that the final concentration of L-alanine is 0.01M is:

0.05M (Stock solution) / 0.01M (Desired Molarity) = 5
In order to obtain a solution with a final concentration of 0.01M,
the stock solution needs to be diluted 5 times.
Desired volume = 1ml
1000ul / 5 = 200ul

200ul of L-alanine stock solution should be added to the buffer and lysozyme solution to make up approximately 1ml.

Final Volume = 1ml
Volume of buffer solution = 1000ul - 200ul = 800ul
Since 1ml of buffer solution requires 40ul of lysozyme stock solution,
800ul / 1000ul = 0.8
0.8 * 40ul = 32ul

Therefore, 800ul of buffer solution requires 32ul of lysozyme stock solution.

Protocol

• 10ul of cwlD spores were added into the lysozyme and buffer solution.
• After the addition of L-alanine to the solution, which would supposedly initiate germination, the solution was left in the incubator for 10 minutes
• After 10 minutes, the eppendorf tube containing the solution was spinned down for approximately 1 minute.
  • Note: Fill another eppendorf tube with water and put it on the opposite site to balance out.
• The supernatant was removed from the eppendorf tube and the spores were resuspended in 1000ul of LB solution.
• A serial dilution was performed as illustrated below, and 50ul of each solution was plated out using glass beads on LB + Cm plates.
• In addition, 5ul of the cwlD spores were plated out using glass beads on LB + Cm plates. No colonies should grow on this plate as the spores were not treated.