From 2009.igem.org

Latest revision as of 08:42, 10 November 2009

Project

Introduction Current therapies Gene therapies DVS Concept Tissue Vector Cell Vector Therapeutic plasmid Conclusion Implementation Tissue targeting Antitumor action Treatment modeling Conclusion

Ressources

BioBricks Material & Method Bibliography

Ethics & Safety

Ethics Safety

Cell targeting

Context

After the tissue vector action, comes the cell vector, this one is a modified bacteriophage which has the ability to infect eukaryotic cells. Lambda phage, because of its high capacity of cloning and a capsid structure adapted to a concentrated presence of exogenous proteins, is a good candidate to design an eukaryotic tissue vector. The penton base originally from the adenovirus capsid appears as a promising candidate for Lambda phage targeting. Indeed, it is endowed of several functions like the cell receptors link, the viral particles internalisation and the release of the capsid by the endosome.

Objective

Our objectives are to design a cell vector of Lambda phage type recombined with a penton base from the adenovirus 5 fused by its D protein. The tissue vector should be able to integer the cell, go out of the endosome, transport its DNA to the nucleus of the cell and finally to transcript its therapeutic genes.

Back to top

Experimental approach

In the framework of recombinant phage gene design we decided to fuse the adenovirus 5 penton base to the D protein of the Lambda phage. The protein D extraction from Lambda phage genome has been lead by Polymerase Chain Reaction (PCR) with several couple of primers. The same strategy has been applied for the adenovirus 5 penton base extraction which has been extracted from a plasmid coding for the virus offered by Dr. Karim Benihoud (UMR8121, CNRS/IGR, Villejuif, France).

After the fusion protein formation, this one is introduced in a BioBrick plasmid. This plasmid contains a resistance against an antibiotic to confirm the transfection of the recombined phage into bacteria and a reporter gene, like GFP, with eukaryotic promoter, the CMV of the Simian virus 40 (SV40), to confirm the transfection in eukaryotic cells. This strategy permits us to prove that the bacteriophage is able to infect eukaryotic cells.

Unfortunately, we have not been able to build the fusion protein in time. However, scientific literature show that the cell vector, a Lambda phage type, confection is possible by fusion of the penton base with the D protein (Stefania Piersanti et al. 2004). The central sequence of the penton base, amino -acids 1 to 571, fused with the bacteriophage offers a transfection in eukaryotic cells, like the use of the RGD fragment responsible for the entry of the virus and the exit of the endosome, fragment 286 to 393.

Back to top

Results

Design of the fusion protein

For the fusion protein design, we decided to extract separately the adenovirus 5 penton base and the D protein of the Lambda phage thanks to primers containing a BalI restriction site on the protein D reverse primer and the penton base forward primer. Moreover the finale fusion protein contains specific BioBricks fragments to its prefix and suffix.
For these 2 genes extraction we used the following primers:

First and second pair for genes extraction:

D protein of the Lambda phage:

Forward : 5' ATG-ACG-AGC-AAA-GAA-ACC-TT 3';
Reverse : 5' AAA-AAA-ATC-CCG-TAA-AAA-AAG-C 3'.

Adenovirus 5 penton base :

Forward : 5' AAT-GGC-CAA-TGC-GGC-GCG-CGG-CGA-TG 3'
Reverse : 5' CTG-CAG-CGG-CCG-CTA-CTA-GTA-TCA-AAA-AGT-GCG-G 3'

Third pair for extension of the BalI restriction site and the BioBrick prefix only for the D protein (already done for the penton base).

Forward : 5' CGA-AAA-AAA-TGC-CCT-AAA-AAA-AAC-CGG-T 3'
Reverse : 5' AAT-GGC-CAA-AAA-AAA-TCC-CGT-AAA-AAA-AGC 3'

Fourth pair for the D protein fusion amplification after ligation of the two fragments.

Forward : 5' CTT-AAG-CGC-CGG-CGA-AGA-TC 3'
Reverse : 5' CTG-CAG-CGG-CCG-CTA-CTA-GTA 3'

PCR results are presented in figure 1. We check that there is the right amplification size fragment 1715bp for the penton base (sample number 11) and 385bp for the D protein (samples 7 and 8). However there is lots of mismatching during amplification cycles. This can have a negative effect on the result of the final amplification.

Figure 1: PCR of D protein BioBrick (1, 2, 3) and the penton base (4, 5, 6), D protein (7 and 8) and penton base (9, 10, 11) with BalI sites

Back to top

Transfection of eukaryotic cells by the Lambda phage recombined with the penton base fused to the D protein (Stefania Piersanti et al., 2004)

A cytofluorimetric study has been done to analyze the transfection rate of recombined Lambda phages. Figure 2 shows cytofluorimetric results of COS-1 cells analyze after to have been exposed to a concentration of 10^6 PFU/cells of recombinants phages, Pb (1-571) or Pb (286-393).

Figure 2 : Analyze of the GFP fluorescence on non recombined Lambda phages (Lambda), recombined Lambda phages with the fragment 286-393 of the penton base (LambdaPb286-393), recombined Lambda phages with the complete penton base (1-571), GFP tagged adenovirus (Ad10 and Ad100)

Firstly, we observe that the recombined phage shows a tag difference independently of the fragment of the penton base used compared to the non transformed bacteriophage. Secondly, the recombined phage with the RGD fragment alone (286-393) has a higher fluorescence than the phage with a complete fragment and closer to the adenovirus one (figure 2).

Back to top

Discussion

Even if the tissue vector has not been finished, scientific literature shows that a recombinant phage creation with a protein coding the adenovirus penton base is possible. It demonstrates as well that fragment coding for RGD sequence alone has a higher capacity to infect eukaryotic cells compared to the penton base complete fragment (figure 2). In the case of our application it is possible to use a recombined Lambda phage to insert our therapeutic gene.

Back to top

Conclusion

To conclude the RGD fragment of the penton base alone has a higher efficiency of interaction with integrines of eukaryotic cells. However for our project, it was more judicious to use the complete sequence of the penton base (fragment 1-571) because the use of the cell vector and the induction system by doxycycline give a very fast and target injection of bacteriophages. The use of a highly efficient transfection system is not advised because phages do not have the time to disperse properly and will infect several times the same cell. The use of the complete fragment of the penton base is sufficient for the phage to infect properly eukaryotic cells and let it time to have a bigger dispersion.

Back to top

Antitumoral Plasmid

Context

In non-small cell lung cancer, or NSCLC, like in all other cancers, the loss of apoptotic capacity of tumor cells is due to the functional loss of various tumor suppressors incoming in the apoptotic pathway.

The DVS application in the anticancer fight is based on the reactivation of this apoptotic pathway by bringing into tumor cells the wild type genes coding for functional tumor suppressors.

The [http://www.sanger.ac.uk/genetics/CGP/cosmic/ COSMIC project] from [http://www.sanger.ac.uk/ Sanger institute] allowed us to determine which genes to bring to the therapeutic plasmid in the non-small cell lung cancer case. This project sums up all detected mutations for each type of cancer in function of their appearance frequency. So, from their data, the loss of apoptotic capacity of tumor cells for lung cancer can be due to the functional loss of proteins from the following genes :

These different genes play a predominant role in the application of the apoptotic process and are the most susceptible to be mutated in the lung cancer case. They compose the therapeutic plasmid.

Back to top

The objective

The objective of this study is to check if a wild type version of a tumor suppressor gene inside the tumor cell, for which the own version is mutated, induce or not the apoptotic phenomenon.

Experimental approach

Cancer cell line and reported gene

Cancer cell lines, which have a mutation of tumor suppressor gene has been selected from our database. We also possess a wild type version of the TP53 gene. Then we choose the prostatic cancer p53 mutated DU-145 in the goals to test if bringing the wild type version of the p53 protein (p53wt) in the DU-145 cell line allows to induce the apoptotic process.

Cell culture protocol :

1. Take out ampoule from liquid nitrogen
   
2. Place the ampoule in 37°C water bath for 5 minutes
   
3. In a 50 ml Falcon tube, put 9 ml of 10% MEM + 1 ml of ampoule
   
4. Harvest 5 min at 1200 rpm
   
5. Discard the supernatant without touching pellet cells (DMSO elimination)
   
6. Resuspend pellet in 1 ml of media
   
7. Put the suspension in a new T25 containing 5 ml of media
   
8. Incubate at 37°C
   
9. Do not forget to change the media the day after to eliminate all DMSO traces
   
10. One week later, cells are at 100% confluence
    

Back to top

TP53 gene incorporation

Incorporation of the plasmid containing p53wt, pcDNA3 CMV+p53wt, inside DU-145 cells is done by electroporation.

Material :

• DU-145 cells
  
• pcDNA3 CMV+p53wt plasmid
  
• Electrocompetent culture media
  
• Trypsin
  
• PBS
  
• Icebox
• Electrotransfer Cuvette
• Centrifuge
• Incubator
• Electroporator (cliniporator)

Protocol:

1. Discard the media of T25 containing DU-145
   
2. Rinse with PBS
   
3. Add 500 µl of trypsin and let it acts for 3 minutes at room temperature
   
4. Add 5 ml of 10% MEM to neutralize trypsin
   
5. Suspend cells
   
6. Recover media containing DU-145 in a tube and harvest at 1000rpm for 10 minutes
   
7. Discard the supernatant and resuspend the pellet in Xµl (X= 90µl x Number of cuvettes) of electrocompetent media (around 5x105 cells per cuvettes)
   
8. Suspend your DNA solution in electrocompetent media (18x10-2g/L)
   
9. Add 10µl DNA solution per cuvette
   
10. Add 90µl of the cell suspension
    
11. Put cuvettes in ice
    
12. Pass cuvettes to the electroporator (cliniporator) and save each result
    
13. Incubate cuvettes at 37°C for 30 minutes
    
14. Put the content of each cuvette in a sterile tube, add 3ml of MEM 10% culture media, and incubate at 37°C for the necessitate time (until the annexin V assay)
    

Back to top

Apoptosis detection

Detection of apoptotic cells is done by the annexin V assay:

In the early stage of the apoptosis, we observe the phosphatidyl-serine translocation outside the cell membrane. This is highlighted by the specific fixation of the annexin V coupled with a fluorophore and analyzed by flow cytometry.

Material :

• Propidium iodide 1 mg/ml Invitrogen stored cold in the fridge, diluted 10 times
  
• Annexin V
  
• Annexin buffer
  

Work as much as possible in the dark (fluorophores are photolabile)

Protocol :

1. Recover culture media (3 ml), put it in a Falcon tube of 50 ml
   
2. Rinse the culture with 3 ml of PBS, and dispose it in the Falcon tube
   
3. Remove cells with trypsin, and dispose them in the Falcon tube
   
4. Harvest
   
5. Resuspend the pellet in 0.5 or 1 ml of cold PBS in function of the confluence level
   
6. Take 10 µl to count and harvest
   
7. Re-suspend the pellet in annexin buffer at a concentration of 1*106 cell/ml
   
8. Take 2 aliquots of 100 µl in 2 FACS tubes
   
9. Add in each tube 5 µl of annexin V and 1 µl of propidium iodide
   
10. Incubate 15 min at RT
    
11. Stop the reaction by put tubes in melting ice
    
12. Add 400 µl of annexin V buffer
    
13. Read in FACS as quick as possible and let tubes in the ice
    

Back to top

The running of the study

To analyse the timing of plasmid expression in the DU-145 cell line, we realized a kinetic monitoring of the apoptosis induction by making an annexin V assay every 6 hours for 48 hours after the plasmid electroporation. By coupling apoptosis rate of the population control (blank electroporation) and the population assay (electroporation with plasmid) with their respective growth rate, we will be able to determine the p53wt impact on apoptosis induction. We use a control without the plasmid pcDNA3 CMV+p53wt to quatify the level of death cells causes by the electroporation and by the culture transfert.

Because we had not a continuous access to the cytometer, we grouped the all 48h analyses in 2 cytometry runs. Each time slot of the study is represented by a distinct cell population. So, we realized 14 electroporations corresponding to the 7 time slots: +6h, +12h, +18h, +24h, +30h, +36h and +48h (two by slot: population assay+ population control).

Here is the allocation planning of electroporations:

Three cell populations were respectively electropored 12h, 24h et 36h before the first cytometry run (in red, at 9 a.m, day 3), four others 6h, 18h, 30h and 48h before the second run (in green, at 4 p.m, day 3).

The first cytometric analyze allowed us to obtain data for the monitoring at +12h, +24h and +36h, while the second one, allowed us to obtain data for the monitoring at +6h, 18h, +30h and +48h.

By coupling all these data, we obtain a monitoring on 48h of the apoptosis induction after p53wt electroporation.

Back to top

Results [1,2]

Each cell population, which represents different time range of the monitoring, has been subjected to an annexin V assay at the instant looked for. Unfortunately, a wrong dilution of the annexin buffer caused the death of each cell population during the test. Even if results were convincing for the monitoring at +24h, +30h and +48h by simple comparison between the control and the test population in the microscope (figure 1), we could not confirm it by cytometric analysis.

Because we could only start DU-145 culture at the beginning of October, the two weeks needed to reach the necessary confluence did not let us to try a second experiment.

However, several studies showed that to bring p53 wild type into tumor mutated cells launch the apoptosis process. It is notably the case of the study leaded by Chunlin Yang in 1995, who was working, like us, on mutated p53 prostatic cancer cells (Tsu-pr1). The p53 wild type were not transfected by electroporation but by infecting tumor cells by non replicatives adenoviruses containing p53wt (AdCMV.p53). 48 hours after the infection of a tumor population with AdCMV.p53, a high expression of p53 is correlated with an important rate of cell death. If control populations (non-infected cells and cells infected with adenovirus containing lacZ gene, AdCMV.NLSßgal) show a similar and healthy morphology, condensation and cell detachment are observed in p53 infected population. To check if the death process followed by cells correspond to the apoptotic way, a migration on agar gel of their genome has been realized.

Figure 2 : Electrophoresis on agar gel of isolated non-infected DNA cells (a), infected by AdCMV.NLSßgal (b) and AdCMV.p53 (c).

Infected by AdCMV.p53, cells show multiple bands (laddering pattern) while non-infected cells or AdCMV.NLSßgal infected cells show a unique one at high molecular weight. These results indicate that the cell induced by p53 wild type is from apoptotic origin by the genome fragmentation observation, consequence to the CAD (Caspase Activated DNase) activity, a specific endonuclease of the apoptotic process.

A MTT test allowed to quantify the effect induced by the p53 wild type expression into infected cells.

Figure 3 : AdCMV.p53 effect on cell survive. Control and AdCMV.p53 infected cells were incubated in serum-free media after 1h of infection.

In serum absence, non-infected and ßgal infected cells continue to proliferate. In contrast, for p53 infected cells, proliferation is stopped and followed by an important fall of population. After 72h, nearly the totality of p53 infected cells were dead (figure 3).

According to this study, it appears clearly that to bring a p53 wild-type version into the p53 mutated cell population induces the apoptosis phenomenon and decreases significantly the tumor population.

Similar results were reported in the study leaded by Corrado Cirielli (in 1999) by using similar analyses on a U251 cancer strain from a glioma.

Figure 4 : morphology AdCMV.p53 infected cells (a), non-infected (b) or infected by AdCMV.NULL (c), after one week infection.

Control populations (b and c) proliferate and form a cell layer one week after the beginning of experiences while the test population (a) show very few adherent cells (important cell loss) and a consequent morphologic change: cells are spherical.

Figure 5 : electrophoresis on agar gel of isolated DNA of non-infected cells, infected by AdCMV.NULL and AdCMV.p53.

After AdCMV.p53 infection, U-251 cells show a fragmentation of their genome, characteristic of the apoptosis process (laddering pattern).

Figure 6 : Control population proliferation (non-infected or AdCMV.NULL infected) and the test population by monitoring of the optical density after a MTT test.

This study shows one more time that to bring a p53wild-type version into a mutated p53 cell population induces cell death by apoptosis.

Back to top

Conclusion [3,4,5,6,7,8,9]

Even if we could not give the proof by our own experiments, many studies show that to bring a wild-type version of a tumor suppressor gene into a mutated tumor cell for this gene permits to launch the apoptosis. In vivo studies on Human in the framework of the prostate, ovary and lung cancers have already been hold and present convincing results.

The implementation of this study has been originally done to determine if the DVS, application in the fight against non small cell lung cancer, is feasible or not. Because we have not been able to conclude, the implementation of the study has been done by analyzing several publications. According to these publications, the application is first confirmed in the framework of the chosen pathology but it can also be reached to others cancers like hepatocellular carcinoma, on which the fact to bring a gene suppressor of tumor launch the apoptosis process. The only limitation is set by the tissue vector tropism.

Back to top

Retrieved from "http://2009.igem.org/Team:SupBiotech-Paris/Antitumor_action"

• Recent changes
• What links here
• Related changes
• Special pages
• My preferences

• Printable version
• Permanent link
• Privacy policy
• Disclaimers